Step
1: Mix
Pro-Venetian Neutral Base to desired color with universal
colorants. Use two clean
Blue Steel Spatulas to patch out the material
on the wall surface. (Use one to hold the material
and the other to apply it).
Step
2: Apply the outside areas first, randomly. Use a
longer "key" first, leaving room to fill
in later with a shorter "locking keys" Lay
the material down at 25 degrees.
Step
3: Continue to fill in areas, randomly. Removing the
excess material with the Spatula at 45 degrees.
Step
4: Fill in the center by patching out the whole area.
Go back and complete the missed areas with overlapping
patches. Be practical and economical with the BASE.
Step
5: Lay
down more at low angles to knock down the nibs along
the way. This is known as "feathering".
Finally, thin the BASE with a little water and "veneer"
the surface using the crosshatch method.
Step
6:Burnish to the desired sheen by dragging
the spatula lightly in a figure 8 pattern.
Apply Acrylic
Clear Satin Wax in patchwork fashion for waterproofing
and abrasion resistance.
جميل جداا بس غالى اوى اسعاركو انا نقاش من مصر
ردحذف